Boat Outfitting - Tools
-
Vendor:Weld Mount
Weld Mount .75" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83212]
.75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...- $23.99
$27.99- $23.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-113 Large White Footman's Strap - Qty. 6 [80113]
Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...- $16.99
$23.99- $16.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83220]
1.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...- $28.99
$33.99- $28.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives 4" - Case of 10 [80850]
AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is...- $15.99
$20.99- $15.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-850 Square Mixing Tip f/2010, 4010, & 8040 Adhesive - 4" case of 50 [8085050]
AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features: Square Mixing Tip 4" Long...- $74.99
$92.99- $74.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 50 [AT-3-50]
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...- $22.99
$35.99- $22.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 500 [805500B]
AT-5B Large Black Nylon Wire Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull...- $246.99
$319.99- $246.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-300 Adhesive Dispensing Gun f/AT-2010 & AT-4020 [80300]
Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges (sold separately) When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.- $60.99
$87.99- $60.99
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - Black - 2-1/2" [299202B-1]
Add-A-Snap - Black - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...- $4.99
$6.25- $4.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-4020 Acrylic Adhesive [4020]
Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for...- $32.99
$43.99- $32.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 100 [803900B]
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...- $44.99
$56.00- $44.99
- Unit price
- per
-
Vendor:Digital Yacht
Digital Yacht J1939 Doctor Diagnostic Tool [ZDIGJDOC]
J1939 Doctor Diagnostic ToolSelf-contained J1939 diagnostics tool with physical network and data analysis on your phone, tablet, PC, or MAC.The J1939 protocol is increasingly being adopted in marine applications, providing monitoring and control for engines, propulsion systems, generators, and electrical networks. To support this...- $410.99
$499.95- $410.99
- Unit price
- per
-
Vendor:T-H Marine Supplies
T-H Marine LED Battery Tester [BE-EL-51004-DP]
LED Battery TesterSpecifically for all 12 Volt DC batteries.- $11.99
$13.99- $11.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-5 Large White Nylon Tie Mount - Qty. 500 [805500]
AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength...- $274.99
$329.99- $274.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-113B Large Black Footman's Strap - Qty. 6 [80113B]
Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...- $17.99
$23.99- $17.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-6031 Metal Bond Adhesive [6031]
AT-6031 Metal Bond AdhesiveAT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in 40 minutes. AT-6031 develops more than 2,500 lbs. (psi) of tensile strength on most metal surfaces,...- $32.99
$43.99- $32.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 1.5" Tall Stainless Steel Stud w/#10 x 24 Threads - Qty. 10 [102424]
1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter....- $32.99
$37.99- $32.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-651 Mixing Tips f/Use w/AT-6031 Adhesive - Qty. 10 [85001575]
AT-651 Mixing Tips for Use with AT-6031 Adhesive - Qty. 10Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a 10 to 1 adhesive that requires a mixing tip with more mixing chambers to ensure proper...- $14.99
$19.99- $14.99
- Unit price
- per
-
Vendor:Davis Instruments
Davis Deluxe Rigging Knife [1551]
Deluxe Rigging KnifeMade entirely of top quality stainless steel with dura-edged blades. Telo Rigging knives are tools that yachtsmen will be proud to own, yet are affordable.Deluxe Rigging Kinfe comes with a marlin spike, shackle key, and screwdriver.- $23.99
$29.99- $23.99
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - Black - 1-1/2" [299201B-1]
Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: This product can expose you to chemicals which are known to the...- $3.99
$5.95- $3.99
- Unit price
- per












