Boat Outfitting
-
Vendor:Weld Mount
Weld Mount No Slide Metal/Composite Bonder *Case of 10* [804010]
No Slide Metal/Composite Bonder *Case of 10*Revolutionary Metal Bonder will hold heavy parts at application without sliding on a vertical or overhead surface. AT-8040 will hold 3,500 lbs in 40 minutes - no Welding, Drilling, or Tapping.Weld Mount AT-8040 is a solvent-free, VOC Compliant,...- $288.99
$377.07- $288.99
- Unit price
- per
-
Vendor:Turning Point Propellers
Turning Point Express Mach3 - Right Hand - Stainless Steel Propeller - EX1/EX2-1315 - 3-Blade - 13.75" x 15 Pitch [31431512]
Express® Mach3™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1315 - 3-Blade - 13.75" x 15 PitchUtilizing almost 40 years of race boat and high performance prop design expertise, our Express® Mach3™ series of props captures all the best techniques and technologies available...- $281.99
$534.00- $281.99
- Unit price
- per
-
Vendor:Turning Point Propellers
Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1421-4L - 4-Blade - 14" x 21 Pitch [21502141]
Hustler® - Left Hand - Aluminum Propeller - LE-1421-4L - 4-Blade - 14" x 21 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced...- $98.99
$186.00- $98.99
- Unit price
- per
-
Vendor:Turning Point Propellers
Turning Point Express Mach4 - Right Hand - Stainless Steel Propeller - EX1/EX2-1319-4 - 4-Blade - 13" x 19 Pitch [31431930]
Express® Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1319-4 - 4-Blade - 13" x 19 PitchThe Prop that put the “four” in Perfourmance! Turning Point’s Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a state-of-the-art...- $320.99
$607.00- $320.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 1.5" Tall Stainless Steel Stud w/#10 x 24 Threads - Qty. 10 [102424]
1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter....- $28.99
$34.99- $28.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83216]
1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...- $22.99
$27.99- $22.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 100 [803900B]
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...- $39.99
$52.51- $39.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83220]
1.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...- $25.99
$30.99- $25.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 50 [805950]
White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...- $23.99
$39.99- $23.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 100 [805900]
White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...- $47.99
$64.96- $47.99
- Unit price
- per
-
Vendor:Turning Point Propellers
Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1419-4L - 4-Blade - 14" x 19 Pitch [21501940]
Hustler® - Left Hand - Aluminum Propeller - LE-1419-4L - 4-Blade - 14" x 19 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced...- $98.99
$186.00- $98.99
- Unit price
- per
-
Vendor:Turning Point Propellers
Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1417-4L - 4-Blade - 14.5" x 17 Pitch [21501740]
Hustler® - Left Hand - Aluminum Propeller - LE-1417-4L - 4-Blade - 14.5" x 17 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced...- $98.99
$186.00- $98.99
- Unit price
- per
-
Vendor:Garmin
Garmin Force Kraken Transducer Replacement Kit [010-12832-26]
Force® Kraken Transducer Replacement KitEasily remove, replace, or upgrade the built-in Garmin transducer on a compatible trolling motor with this kit. It’s recommended to replace all O-rings and compression seals so the motor returns to its original factory waterproof sealing. The nose cone is...- $34.99
$39.99- $34.99
- Unit price
- per
-
Vendor:Marinco
Marinco Marine On-Board Hard Wired Charger Inlet - 15Amp - Black [150BBI]
On-Board Charger InletGreat for Bass Boats! The Marinco On-Board Charger Inlet makes battery charging through an on-board battery charger safer and more convenient. The inlet mounts on the boat's exterior and is hard wired directly to the charger. Just open the flip lid cover...- $19.99
$26.57- $19.99
- Unit price
- per
-
Vendor:Seakeeper Ride
Seakeeper Ride 10:1 Adhesive Nozzle Pack (6) [41177]
10:1 Adhesive Nozzle Pack (6)This bulk pack of adhesive nozzles is meant to be used with SCIGRIP’s 490 ml 10:1 Ratio Methacrylate Adhesive, which can be used for Seakeeper Ride installations.Specifications:Package Size: 6- $15.99
- $15.99
- Unit price
- per
-
Vendor:RAILBLAZA
RAILBLAZA Flag Pole - Aluminum [02-4009-11]
Flag Pole - AluminumAre you looking for a light, strong flag pole to display your pride? Look no further! Our Flag Pole is everything you need and more – the perfect accessory to proudly affix your favorite flag. Whether it’s an international maritime diving...- $29.99
$30.00- $29.99
- Unit price
- per
-
Vendor:RAILBLAZA
RAILBLAZA Camera Boom 600 R-Lock [02-4132-11]
Camera Boom 600 R-LockCapture the action in ways you never dreamed possible with the RAILBLAZA Camera Boom 600 R-Lock! This innovative mount is perfect for photographers looking to take pictures of all the excitement out on the water. With over 30 inches of length...- $66.99
$69.99- $66.99
- Unit price
- per
-
Vendor:T-H Marine Supplies
T-H Marine Transom Support Plate Lower Mount [TSP-2-DP]
Transom Support Plate Lower MountFeatures: 10" Bolt Hole Pattern Top Bolt Holes-Standard 3/8" Thickness. High quality Cast Aluminum Distributes the stress of the motor mounting bolts- $21.99
$27.57- $21.99
- Unit price
- per
-
Vendor:Rupp Marine
Rupp Aluma Guard Aluminum Protectant - 16oz. Spray Bottle - Case of 12 [CA-0088]
Aluma Guard - 16oz. Spray Bottle - Case of 12Aluma Guard One-Step Protectant is the easy and safe way to restore and preserve aluminum and other metals including stainless steel, brass and chrome. Specially formulated by Rupp Marine, Aluma Guard forms a protective coating...- $237.00
- $237.00
- Unit price
- per
-
Vendor:Rupp Marine
Rupp Aluma Guard Aluminum Protectant - 16oz. Spray Bottle [CA-0087]
Aluma Guard - 16oz. Spray BottleAluma Guard One-Step Protectant is the easy and safe way to restore and preserve aluminum and other metals including stainless steel, brass and chrome. Specially formulated by Rupp Marine, Aluma Guard forms a protective coating on surfaces that prevents...- $17.99
$19.75- $17.99
- Unit price
- per