Airmar
-
Vendor:Airmar
Airmar 10-Conductor In-Line Cable Splice - IP67 [D00342H]
10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a...- $29.99
$35.00- $29.99
- Unit price
- per
-
Vendor:Airmar
Airmar 117WR-1 Crows Foot Transducer Wrench [117WR-1]
117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $29.99
$32.10- $29.99
- Unit price
- per
-
Vendor:Airmar
Airmar 117WR-2 Transducer Hull Nut Wrench [117WR-2]
117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555 Specifications: Type: Tools Box Dimensions:...- $39.99
$45.00- $39.99
- Unit price
- per
-
Vendor:Airmar
Airmar 117WR-4 Transducer Housing Wrench [117WR-4]
117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).Use wrench 117WR-2 or 117WR-3 for...- $29.99
$35.00- $29.99
- Unit price
- per
-
Vendor:Airmar
Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]
164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with: B164 SS164 SS264 Specifications: Type: Tools Box Dimensions: 1"H x 6"W x...- $49.99
$68.00- $49.99
- Unit price
- per
-
Vendor:Airmar
Airmar 175WR-4 Transducer Housing Wrench [175WR-4]
175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264...- $32.99
$39.00- $32.99
- Unit price
- per
-
Vendor:Airmar
Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]
60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $29.99
$35.00- $29.99
- Unit price
- per
-
Vendor:Airmar
Airmar 60WR-2 Transducer Hull Nut Wrench [60WR-2]
60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W...- $39.99
$45.00- $39.99
- Unit price
- per
-
Vendor:Airmar
Airmar 60WR-4 Transducer Housing Wrench [60WR-4]
60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60 Specifications: Type: Tools...- $30.99
$36.00- $30.99
- Unit price
- per
-
Vendor:Airmar
Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]
75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $30.99
$36.00- $30.99
- Unit price
- per
-
Vendor:Airmar
Airmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]
75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x...- $40.99
$46.00- $40.99
- Unit price
- per
-
Vendor:Airmar
Airmar 75WR-4 Transducer Housing Wrench [75WR-4]
75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with: B75 SS75 Specifications: Type:...- $32.99
$37.00- $32.99
- Unit price
- per
-
Vendor:Airmar
Airmar Deadrise Angle Finder - Accuracy of 1/2 Degree [ANGLE FINDER]
Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features: Quickly measures boat hull deadrise angle. Ball...- $13.99
$25.00- $13.99
- Unit price
- per
-
Vendor:Airmar
Airmar Furuno 10-Pin Mix Match Cable f/High or Medium Frequency CHIRP Transducers [MMC-10F-HM]
Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP TransducersFeatures: 10-Pin For High or Medium Frequency CHIRP Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:...- $110.99
$127.50- $110.99
- Unit price
- per
-
Vendor:Airmar
Airmar Furuno 10-Pin Mix Match Cable f/Low Frequency CHIRP Transducers [MMC-10F-L]
Furuno 10-Pin Mix & Match Cable for Low Frequency CHIRP TransducersFeatures: 10-Pin For Low Frequency CHIRP Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions:...- $110.99
$127.50- $110.99
- Unit price
- per
-
Vendor:Airmar
Airmar Furuno 12-Pin Mix Match Cable f/CHIRP Dual Element Transducers [MMC-12F]
Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...- $110.99
$127.50- $110.99
- Unit price
- per
-
Vendor:Airmar
Airmar Garmin 12-Pin Mix Match Cable f/Chirp Transducers [MMC-12G]
Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...- $110.99
$127.50- $110.99
- Unit price
- per
-
Vendor:Airmar
Airmar Garmin 8-Pin Mix Match Chirp Cable - 1M [MMC-8G]
Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features: 8-Pin Length: 1M Chirp Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...- $110.99
$127.50- $110.99
- Unit price
- per
-
Vendor:Airmar
Airmar Humminbird 9-Pin Mix Match Chirp Cable - 1M [MMC-HB]
Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for HumminbirdFeatures: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...- $110.99
$127.50- $110.99
- Unit price
- per
-
Vendor:Airmar
Airmar Navico 9-Pin Dual Mix Match Cable f/Dual Element Transducers [MMC-9N2]
Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter...- $110.99
$127.50- $110.99
- Unit price
- per