Boat Outfitting - Tools
-
Vendor:Weld Mount
Weld Mount No Slide Metal/Composite Bonder [8040]
No Slide Metal/Composite BonderRevolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based,...- $32.99
$42.99- $32.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount No Slide Metal/Composite Bonder *Case of 10* [804010]
No Slide Metal/Composite Bonder *Case of 10*Revolutionary Metal Bonder will hold heavy parts at application without sliding on a vertical or overhead surface. AT-8040 will hold 3,500 lbs in 40 minutes - no Welding, Drilling, or Tapping.Weld Mount AT-8040 is a solvent-free, VOC Compliant,...- $331.99
$399.99- $331.99
- Unit price
- per
-
Vendor:Sea-Dog
Sea-Dog Add-A-Snap - Black - 4" [299204B-01]
Add-A-Snap - Black - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State...- $4.99
$6.35- $4.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-3 Small White Nylon Tie Mount - Qty. 500 [803500]
AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull...- $221.99
$268.99- $221.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 6030 [8014]
AT-14 1 to 1 Adhesive Gun Plunger for AT-2010, AT-4020 & AT-6030 AdhesivesAT-14 is specifically for Weld Mount AT-2010, AT-4020, and AT-6030 adhesives. (sold separately)- $12.99
$17.99- $12.99
- Unit price
- per
-
Vendor:GROCO
GROCO Spanner Wrench/Deck Plate Key [SW-2531]
Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location. C83600 bronze- $20.99
$33.00- $20.99
- Unit price
- per
-
Vendor:T-H Marine Supplies
T-H Marine Oetiker Stepless Clamp Kit w/Pliers [18500000]
Oetiker Stepless Clamp Kit with PliersStepless™ 150-Piece Clamp Rigging Kit by T-H Marine®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by T-H Marine® will last a...- $148.99
$235.99- $148.99
- Unit price
- per
-
Vendor:Panther Products
Panther Replacement Blade f/Rope Cutter [757061]
Replacement Blade for Rope CutterIdeal for boat, camper and home use. Lightweight (1. 5 lbs. ), The handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes, lines and strapping....- $19.99
$23.96- $19.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 50 [805950]
White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...- $27.99
$42.99- $27.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 1.5" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Threads - Qty. 15 [83224]
1.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...- $30.99
$34.99- $30.99
- Unit price
- per
-
Marine Formula by DeBond Corporation Marine Formula 10oz Aerosol [MF10U]
Marine Formula™ 10oz AerosolMarine Formula™ is a specially formulated patented mixture that cleans and removes adhesives and sealants on and inside the boat. Use Marine Formula™ to clean up and remove these common marine adhesives and sealants. Quick Guide (pdf)- $31.99
$38.95- $31.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 100 [805900B]
Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's...- $54.99
$70.99- $54.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 100 [803900]
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...- $44.99
$56.99- $44.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83216]
1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide...- $25.99
$30.99- $25.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 50 [803950B]
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50...- $22.99
$36.99- $22.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount AT-4020 Acrylic Adhesive - 10-Pack [402010]
Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is...- $331.99
$399.99- $331.99
- Unit price
- per
-
Vendor:Panther Products
Panther Portable Rope Cutting Gun [757060B]
Portable Rope Cutting GunPanther’s portable Rope Cutting Gun is ideal for boat, camper and home use. Lightweight (1.5 lbs), the handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes,...- $48.99
$55.31- $48.99
- Unit price
- per
-
Vendor:GROCO
GROCO Thru-Hull Installation Tool [THT-530]
Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer. Slide the thru-hull fitting, flanged end first, over the tool. (It will stop at the proper step.) Tie a length of monofilament to the...- $135.99
$211.00- $135.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount .75" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10 [102412]
.75" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter....- $27.99
$32.99- $27.99
- Unit price
- per
-
Vendor:Weld Mount
Weld Mount 8040 Acrylic Adhesive w/Plunger [804030]
8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-8040 cures in 10-12 minutes, has...- $15.99
$21.99- $15.99
- Unit price
- per












