Airmar
-
Vendor:Airmar
Airmar 10-Conductor In-Line Cable Splice - IP67 [D00342H]
10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a...- $29.99
$35.00- $29.99
- Unit price
- per
-
Vendor:Airmar
Airmar 11-Pin Low-Frequency Mix Match Cable f/Raymarine [MMC-11R-LDB]
11-Pin Low-Frequency Mix & Match Cable for RaymarineSome CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an...- $110.99
$127.50- $110.99
- Unit price
- per
-
Vendor:Airmar
Airmar 117WR-1 Crows Foot Transducer Wrench [117WR-1]
117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $29.99
$32.10- $29.99
- Unit price
- per
-
Vendor:Airmar
Airmar 117WR-2 Transducer Hull Nut Wrench [117WR-2]
117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555 Specifications: Type: Tools Box Dimensions:...- $39.99
$45.00- $39.99
- Unit price
- per
-
Vendor:Airmar
Airmar 117WR-3 Double Handle Transducer Wrench [117WR-3]
117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $49.99
$53.73- $49.99
- Unit price
- per
-
Vendor:Airmar
Airmar 117WR-4 Transducer Housing Wrench [117WR-4]
117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).Use wrench 117WR-2 or 117WR-3 for...- $29.99
$35.00- $29.99
- Unit price
- per
-
Vendor:Airmar
Airmar 164WR-1 Crows Foot Transducer Wrench [164WR-1]
164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $38.99
$50.00- $38.99
- Unit price
- per
-
Vendor:Airmar
Airmar 164WR-2 Transducer Hull Nut Wrench [164WR-2]
164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with: B164 SS164 SS264 Specifications: Type: Tools Box Dimensions: 1"H x 6"W x...- $49.99
$68.00- $49.99
- Unit price
- per
-
Vendor:Airmar
Airmar 164WR-3 Double Handle Transducer Wrench [164WR-3]
164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $61.99
$84.00- $61.99
- Unit price
- per
-
Vendor:Airmar
Airmar 175WR-4 Transducer Housing Wrench [175WR-4]
175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264...- $32.99
$39.00- $32.99
- Unit price
- per
-
Vendor:Airmar
Airmar 599 Low/High Frequency - In-Hull Chirp Transducer w/o Connector [R599C-LH]
Low/High Frequency - In-Hull Chirp Transducer without ConnectorRely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with...- $4,683.99
$5,737.50- $4,683.99
- Unit price
- per
-
Vendor:Airmar
Airmar 60WR-1 Crows Foot Transducer Wrench [60WR-1]
60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $29.99
$35.00- $29.99
- Unit price
- per
-
Vendor:Airmar
Airmar 60WR-2 Transducer Hull Nut Wrench [60WR-2]
60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60 Specifications: Type: Tools Box Dimensions: 1"H x 5"W...- $39.99
$45.00- $39.99
- Unit price
- per
-
Vendor:Airmar
Airmar 60WR-3 Double Handle Transducer Wrench [60WR-3]
60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $49.99
$56.00- $49.99
- Unit price
- per
-
Vendor:Airmar
Airmar 60WR-4 Transducer Housing Wrench [60WR-4]
60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60 Specifications: Type: Tools...- $30.99
$36.00- $30.99
- Unit price
- per
-
Vendor:Airmar
Airmar 75WR-1 Crows Foot Transducer Wrench [75WR-1]
75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $30.99
$36.00- $30.99
- Unit price
- per
-
Vendor:Airmar
Airmar 75WR-2 Transducer Hull Nut Wrench [75WR-2]
75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with: B75 SS75 Specifications: Type: Tools Box Dimensions: 1"H x 5"W x...- $40.99
$46.00- $40.99
- Unit price
- per
-
Vendor:Airmar
Airmar 75WR-3 Double Handle Transducer Wrench [75WR-3]
75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...- $49.99
$56.00- $49.99
- Unit price
- per
-
Vendor:Airmar
Airmar 75WR-4 Transducer Housing Wrench [75WR-4]
75WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75WR-2 or 75WR-3 for the hull nut.For use with: B75 SS75 Specifications: Type:...- $32.99
$37.00- $32.99
- Unit price
- per
-
Vendor:Airmar
Airmar B117 Bronze 0 Depth Temp w/Ray Connector f/CP370 DSM300 [B117-DT-RAY]
B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull. The plastic P319...- $278.99
$322.50- $278.99
- Unit price
- per